Application

Disc connector link is a type of isolator switch but is individual phase operated switch. Its operation is achieved by insulated operating rod. Disc connector link has been designed to suit in combined overhead underground network. It is installed at point of tapping from overhead line to underground cable. High standard performance and easy fault location are combined with low installation cost and safety from mischievous operation makes the disc connector link best suitable for overhead network used in high-density urban situation.

Construction

The Disconnector link have single pole construction and shall be suitable for Vertical / Horizontal mounting. Each pole consist of galvanized steel base, insulators of reputed make, copper alloy male and female contacts. Ferrous parts are Hot dip galvanized and non-ferrous parts are heavily tinned. Jumper is of EC grade braided copper of appropriate size to complete the current path.

Operation

For smooth, sturdy and trouble free operation, Operating Clamp is provided on moving blade to operate the link on and off from ground level. This operation is achive by insulated operating or discharge rod.

Installation

It can be mount vertically and horizontally on 2 nos. channels based on two-pole structure. Install phase of Disconnector link on structure as per system requirment, make the termination by using aluminium lug and simply charge it.

TECHNICAL PERTICULARS :

Sr. No.	PART NAME	QTY.
1	SYSTEM VOLTAGE	11 KV	22 KV
2	RATED VOLTAGE	12 KV	24 KV
3	RATED CURRENT	400 AMP.	400 AMP.
4	IMPULSE WITHSTAND VOLTAGE TO EATH	60 KV	120 KV
	ACROSS THE TERMINALS	75 KV	152 KV
5	POWER FREQ. WITH STAND VOLT TO EARTH	28 KV	56 KV
	ACROSS THE TERMINALS	32 KV	62 KV
6	RATED SHORT TIME CURRENT FOR 1 SEC.	16 KA	16 KA
7	WEIGHT OF DISCONNECTOR SET (APX.)	85 KG.	115 KG.
8	GOVERNING SPECIFICATION	IS 9921-1985